Bitumen Solubility Tester Manufacturer

Product Name:

Emulsified Asphalt Distillation Residue Tester

Model:

TBT-1617

Description:

TBT-1617 is designed to determine the residue in asphalt emulsions and oil dtillate in asphalt emulsions.

Product Name:

Automatic Penetrometer

Model:

TBTZRD-5CS

Description:

TBTZRD-5CS is used to measure the penetration of petroleum asphalt, modified asphalt and residue after evaporation of liquid petroleum asphalt or emulsified asphalt, and automatic calculate the penetration value.

Product Name:

Rotational Viscometer

Model:

TBTVM-1FW

Description:

TBTVM-1FW is designed and made according to the ASTM D4402 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer.

Product Name:

Asphalt Mixture Indentation Penetrometer--

Model:

TBTIP-1W

Description:

TBTIP-1W is mainly used to measure the penetration and penetration increment of poured asphalt mixture under specified temperature and load, to evaluate the high temperature stability of poured asphalt mixture, and to carry out mix design and quality management of poured asphalt mixture.

Product Name:

Bitumen Ductility Tester

Model:

TBT-4508W

Description:

TBT-4508W Bitumen Ductility Tester is used to determine the distance to which it will elongate before breaking when two ends of a briquette specimen of the material are pulled apart at a specified speed and at a specified temperature, which is named as the bitumen ductility, and also it can measure the ductility of the coal tar pitch. It is a multi-purpose device that integrated asphalt elongation, asphalt force measurement ductility and asphalt elastic recovery capability.

Product Name:

Asphalt Mixture Cutting Machine

Model:

TBTASQ-1

Description:

TBTASQ-1 Asphalt Mixture Cutting Machine is used to cut asphalt specimen for Asphalt Mixture Bending Test, Asphalt Mixture Shearing Strength Test and Asphalt Mixture Uniaxial Compression Dynamic Modulus Test.

Product Name:

Cohesion Tester

Model:

TBT-0754H

Description:

TBT-0754H is designed referring to the ASTM D3910 Standard Practices for Design, Testing, and Construction of Slurry Seal. It can determine the time required for emulsified asphalt slurry seal mixtures to fully cure, which is essential for defining the early traffic opening time post-construction.

Product Name:

Pendulum Skid Resistance Tester

Model:

TBTPFC-1

Description:

TBTPFC-1 Pendulum Skid Tester measures the frictional resistance between a rubber slider mounted on the end of a pendulum arm and the test surface, to check the resistance of wet and dry surfaces to slipping and skidding. It can test surface friction and skid resistance; Aggregates in PSV(Polished Stone Value) test and Road surface friction test.

Working mode	Double lines
Suction method	Suction pump. Rate can be adjusted continuously
Film	Fiberglass film. Minimum size 0.65μm
Solvent	Trichloroethylene
Maximum power consumption	100W
Working temperature & humidity	-10℃~+30℃, ＜85%RH
Size	420×320×360mm
Weight	8.8kg
Power supply	220V, 50Hz

Bitumen Solubility Tester TBT-0607

Other Products