COC Flash Point Tester TBT-267

Item Code:TBT-267 Features:
  • Description
  • Referring Standard
  • Features
  • Technical Specification

1.This instrument is designed as per the standard SH/T 0318、GB/T267.

2.The heating power is continuously adjustable.The power is displayed by an electric current meter. The temperature control is advanced and reasonable.

3.It adopts a tiny desktop structure. Easy to operate.

 

 

Power supply

AC 220 V±10%, 50 Hz;

Outer crucible:

(1) Material: 0.3 carbon steel, the surface is black.

(2) Inner diameter of upper opening: Φ100±5 mm

(3) Height: 50±5 mm

(4) Inner diameter of bottom: Φ56±2 mm

Inner crucible:

 

(1) Material: 0.3 carbon steel, the surface is black

(2) Inner diameter of upper opening: Φ64±1 mm

(3) Height: 47±1 mm

(4) Inner diameter of bottom: 38±1 mm

(5) Scale line: there are two scale lines at 12 mm and 18 mm from the upper opening.

Gas conduit

the diameter of spout is 0.8mm~1 mm, and the surface of inner hole is smooth, so it can adjust fire length to 3mm~4 mm.

Heater

It is heated by electric furnace. Heating power is 1000 W, adjustable.

Thermometer

0℃~360 ℃, scale division is 1 ℃. It is in accord with GB/T514 “Technical Requirement of Liquid Thermometer Used for Petroleum Products Test”.

Ambient temperature

≤35 ℃

Relative humidity:

≤85%

Maximum power consumption

1100W  

 

Other Products

Product Name:
Distillation Tester (Low Temperature Single Tube)
Model:
TBT-6536C
Description:
TBT-6536C is designed referring to ASTM D86 Standard Test Method of Distillation for Petroleum Products at Atmospheric Pressure. It is suitable to determine the distillation characteristics of gasoline, aviation gasoline, jet fuels, special boiling point solvent, naphtha, diesel oil, distillate and similar petroleum products.
Product Name:
Fully-automatic Cleveland Open Cup Flash Point Tester
Model:
TBT-3536D
Description:
TBT-3536D is designed referring to ASTM D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester.
Product Name:
Low Temperature Kinematic Viscometer
Model:
TBT-265G
Description:
TBT-265G is designed referring to ASTM D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids(and Calculation of Dynamic Viscosity), it is used to test at low temperature.
Product Name:
Ash Content Tester
Model:
TBT-508
Description:
TBT-508 is designed referring to ASTM D482 Standard Test Method for Ash from Petroleum Products. It is used to determine ash content in the petroleum products without ash-forming additives(excluding additives containing certain phosphorus compounds), lubricating oils without lead and unused engine crankcase oils.
Product Name:
X-ray Fluorescence Sulfur Analyzer
Model:
TBTXFS-4294P
Description:
TBTXFS-4294P is designed referring to ASTM D4294 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry.
Product Name:
Automatic Kinematic Viscometer
Model:
TBT-265H-1
Description:
Product Name:
Automatic Cleaning Metrohm Titration Basic Nitrogen Content Oil Tester
Model:
TBT-0162
Description:
TBT-0162 is used to determine the basic nitrogen in petroleum products under the control of the computer. It ensures the accuracy of the results by titration curve smoothing and titration end position correction.
Product Name:
Low Temperature Brookfield Viscometer
Model:
TBT-11145
Description:
more