Petroleum asphalt four-component tester TBT-0618C

  • Petroleum asphalt four-component tester
  • Petroleum asphalt four-component tester
Item Code:TBT-0618C Features:
  • Description
  • Referring Standard
  • Features
  • Technical Specification

 

    This instrument is based on the industry standard of the people's Republic of China 0509-2010 JTG "petroleum asphalt four-component determination method" and TG E20-2011 "Highway Engineering asphalt and asphalt mixture test procedures" in T 0618-1993 "Asphalt chemical composition test (four-component method)" provides the design and manufacture of it. It is the ideal instrument for measuring petroleum asphalt saturate, aromatic, resin and asphaltene four components.

    The instrument can also refer to People's Republic of China industry standards SH / T 0266-1992 (1998) " Petroleum asphaltene content determination method" to measure diesel, fuel oil, lubricating oil, asphalt and remove low boiling point fractions of crude oil asphaltene before 260 ℃.

 

Heating furnace

1. Electric heater power range: 100W ~ 1000W, stepless adjustable;

2. Dimension: 270㎜ × 160㎜ × 115㎜ (length × width × height);

3. Total power consumption: less than 1200W.

 

Circulating water bath --HWY-10 multifunction circulation water bath

 

1. Bath volume: 10L;

2. Temperature range: -10 ℃ ~ 95 ℃;

3. Constant temperature accuracy: ± 0.2 ℃;

4. The cycle of water: ≥4L / min;

5. Dimensions: 530 mm × 400 mm × 430 mm (length × width × height);

6. Total power consumption: less than 1100W.

 

Base and column

1. Base size: 345㎜ × 210 mm;

2. Column total height: 1120 mm.

 

 

1. Vacuum drying oven: a vacuum of 267Pa (2 mm Hg);

2. High temperature furnace: 0 ℃ ~ 1000 ℃, there is an automatic temperature controller;

3. Balance: Weighing 120g, the sense of the amount of 0.1mg.

Other Products

Product Name:
Cleveland Open Cup Flash Point Tester
Model:
TBT-3536
Description:
TBT-3536 is designed referring to ASTM D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester.
Product Name:
Automatic Fraass Breaking Point Tester(Fraass Method)
Model:
TBT-0613A
Description:
TBT-0613A Automatic Fraass Breaking Point Tester is designed referring to EN 12593 Bitumen and bituminous binders - Determination of the Fraass breaking point.
Product Name:
Load Wheel Rolling Tester
Model:
TBT-0755
Description:
TBT-0755 is suitable to control the upper limit of asphalt used in the slurry mixtures, also it can confirm the best asphalt content of slurry mixtures together with wet wheel abrasion test .
Product Name:
Sand Equivalent Test Apparatus
Model:
TBT-0334
Description:
TBT-0334 is designed to measure the sand equivalent value in various fine aggregates, such as natural sand, manufactured sand, and stone chips.
Product Name:
Asphalt Bending Beam Rheometer
Model:
TBTBBR-1
Description:
TBTBBR-1 Bending Beam Rheometer is designed according to AASHTO T313, ASTM D6648 and EN 14771 to perform flexural creep stiffness of asphalt binder at the low-temperature condition.
Product Name:
Asphalt Tenacity Tester
Model:
TBT-0624
Description:
TBT-0624 is designed referring to ASTM D5801 Standard Test Method for Toughness and Tenacity of Asphalt Materials. It can be used to determine the tenacity of asphalt under specified condition.
Product Name:
Engler Viscometer
Model:
TBTWNE-1B-1
Description:
TBTWNE-1B-1 Engler Viscometer is suitable to determine the rate of time (seconds) of liquid flow out from Engler viscometer and time(seconds) of distilled water flow out at 20℃ under certain temperature and cubage.
Product Name:
Asphalt Gyratory Compactor
Model:
TBTXY-170
Description:
TBTXY-170 Asphalt Gyratory Compactor is used to determining the compaction performance of asphalt mixture.
more