Dropping Point Tester(Oil Bath) Manufacturer

Product Name:

Model:

TBT-0536

Description:

TBT-0536 is designed referring to ASRM D3230 Standard Test Method for Salts in Crude Oil (Electrometric Method). It adopts the micro-coulometry technology for analysis, it’s the latest products by the computer control.

Product Name:

Low Temperature Kinematic Viscometer

Model:

TBT-265G

Description:

TBT-265G is designed referring to ASTM D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids(and Calculation of Dynamic Viscosity), it is used to test at low temperature.

Product Name:

Rapid Equilibrium Closed Up Flash Point Tester

Model:

TBT-5208

Description:

Product Name:

Fully-automatic Cleveland Open Cup Flash Point Tester

Model:

TBT-3536D

Description:

TBT-3536D is designed referring to ASTM D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester.

Product Name:

Ash Content Tester

Model:

TBT-508

Description:

TBT-508 is designed referring to ASTM D482 Standard Test Method for Ash from Petroleum Products. It is used to determine ash content in the petroleum products without ash-forming additives(excluding additives containing certain phosphorus compounds), lubricating oils without lead and unused engine crankcase oils.

Product Name:

Automatic Vapor Pressure Tester (Reid Method)

Model:

TBT-8017A

Description:

TBT-8017A is designed referring to ASTM D323 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method). It is used to test make determination for vapor pressure of gasoline, volatile crude oil and other volatile petroleum products.

Product Name:

Density, Kinematic Viscosity, Viscosity Index Tester

Model:

TBT-1884B

Description:

TBT-1884B is designed referring to ASTM D1298 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method, ASTM D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) and ASTM D2270 Standard Practice for Calculating Viscosity Index from Kinematic Viscosity at 40℃ and 100℃.

Product Name:

Cleveland Open Cup Flash Point Tester

Model:

TBT-3536-1

Description:

TBT-3536-1 is designed referring to ASTM D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester.

Oil bath	600 ml beaker
Grease cup	Made of chrome plated brass. Its inner diameter is about 9.92 mm and the diameter of orifice for dropping oil is 2.8 mm The height of the cup is about 12mm
Test tube	A tube made of heat-resistant glass with rim. Its inner diameter is 11.1mm to 12.7mm. There are three indentations at about 19mm from the bottom, equally spaced on the circumstance. These indentations are used for supporting the grease cup
Thermometer	-5℃~300℃, scale value is 1℃ Total length is 390mm and the depth immersed is about 76mm
Heater	800W tubular heater
Stirring motor	Rotating speed 60RPM
Working temperature & humidity	-10~40℃, ≤85%RH
Max. power consumption	900W
Size	350×180×410mm
Power supply	220V, 50Hz

Dropping Point Tester(Oil Bath) TBT-4929A

Other Products