Mortar Setting Time Tester TBTMST-100

Item Code:TBTMST-100 Features:TBTMST-1000 is suitable for setting the setting speed and setting time of wall mortar and wall mortar in terms of penetration resistance. The mortar setting time tester is one of the special equipments for various construction research institutes and laboratories of colleges and universities.
  • Description
  • Referring Standard
  • Features
  • Technical Specification

TBTMST-1000 is suitable for setting the setting speed and setting time of wall mortar and wall mortar in terms of penetration resistance. The mortar setting time tester is one of the special equipments for various construction research institutes and laboratories of colleges and universities.

Measurement range

0~100N

Accuracy

1%

Resolution

0.5N

Max. stroke

50mm

Needle cross area

30mm2

Mould inner diameter and height

140×75mm

 

Other Products

Product Name:
Air Jet Sieve System
Model:
TBTAIR-200
Description:
TBTAIR-200 adopts a high-end electronic vortex generator imported from the USA. With the combination of a negative pressure generator, an air jet sieve produces fines.
Product Name:
Cement Mortar Air Content Meter
Model:
TBT-B2030
Description:
TBT-B2030 is used for the determination of the total air content in cement paste, mortar and masonry cement. These meters have a pressure chamber, in which a defined pressure is generated.
Product Name:
Cement Paste Consistometer
Model:
TBTSC-145
Description:
TBTSC-145 is measure the fluidity of cement (sands) slurry. It fit use for measure the outflow of cement (sands) slurry time less than 14~18 seconds.
Product Name:
Manual Pellet Press
Model:
MPP-24T/30T
Description:
MPP-24T/30T is a manually operated hydraulic pellet press with particularly simple and safe operation for the preparation of solid samples for X-ray fluorescence analysis or infrared spectroscopy.
Product Name:
Electrical Flexure Testing Device
Model:
TBTDKZ-5000
Description:
DKZ-5000 is used for flexure strength test of cement specimen other nonmetallic material.
Product Name:
Sulfur Calcium Iron Analyser
Model:
TBTGTL-3300
Description:
TBTGTL-3300 Sulfur Calcium Iron Analyser is a new type of microcomputer table instrument which adopts pure physical analysis method. Used in cement factory, it can quickly measure the percentage content of SO3, CaO, Fe2O3 in raw material, clinker, cement, gypsum and so on in 30 seconds.
Product Name:
Cement Test Mill
Model:
TBTSM-500
Description:
TBTSM-500 Cement Test Mill is used to grind cement clinker and other material in the laboratory.
Product Name:
Mud Water Loss Detector
Model:
TBTNS-1
Description:
TBTNS-1 is used to determine the water loss of drilling slurry when it goes through a certain size of filtration area within a certain time (30 minute) under stipulated working pressure (0.69 MPa).
more